Datasheet

This document was generated on 07/29/2019
PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION
Part Number:
0430450200
Status:
Active
Overview: Micro-Fit Connector System
Description: Micro-Fit 3.0 Right-Angle Header, 3.00mm Pitch, Dual Row, 2 Circuits, with Snap-in
Plastic Peg PCB Lock, Tin, Glow-Wire Capable, Black
Documents:
Drawing (PDF) Test Summary TS-43045-001-001 (PDF)
3D Model Test Summary TS-46235-001-001 (PDF)
Packaging Specification PK-70873-0313-001 (PDF) RoHS Certificate of Compliance (PDF)
Test Summary 430450004-TS-000 (PDF) Product Literature (PDF)
Agency Certification
CSA LR19980
UL E29179
General
Product Family PCB Headers
Series 43045
3D Viewer Yes
Application Power, Wire-to-Board
CURRENT-MAX-NUMERIC 8.5
Comments "High Temperature|Square Pin|Solder Type<P><P>This
Molex product is manufactured from material that
has the following ratings, tested by independent
agencies:. a) A Glow Wire Ignition Temperature
(GWIT) of at least 775 deg C per IEC60695-2-13..
b) A Glow Wire Flammability Index (GWFI) above
850 deg C per IEC 60695-2-12.and hence complies
with the requirements set out in the International
Standard IEC 60335-1 5th edition - household and
similar electrical appliances - safety, section 30
Resistance to heat and fire. <P><P> The customers
using this product must determine its suitability for use
in their particular application through testing or other
acceptable means as described in end-product glow-
wire flammability test standard IEC 60695-2-11 and
any applicable product end-use standard(s). <P> If
it is determined during the customer’s evaluation of
suitability, that higher performance is required, please
contact Molex for possible product options.", "High
Temperature|Square Pin|Solder Type<P><P>This
Molex product is manufactured from material that
has the following ratings, tested by independent
agencies:. a) A Glow Wire Ignition Temperature (GWIT)
of at least 775 deg C per IEC60695-2-13.. b) A Glow
Wire Flammability Index (GWFI) above 850 deg C
per IEC 60695-2-12.and hence complies with the
requirements set out in the International Standard IEC
60335-1 5th edition - household and similar electrical
appliances - safety, section 30 Resistance to heat
and fire. <P><P> The customers using this product
must determine its suitability for use in their particular
application through testing or other acceptable means
as described in end-product glow-wire flammability test
standard IEC 60695-2-11 and any applicable product
end-use standard(s). <P> If it is determined during
Series image - Reference only
EU ELV
Not Relevant
EU RoHS China RoHS
Compliant
REACH SVHC
Not Contained Per
-ED/88/2018 (15
January 2019)
Halogen-Free
Status
Low-Halogen
For more information, please visit Contact US
China ROHS Green Image
ELV Not Relevant
RoHS Phthalates Not Contained
Search Parts in this Series
43045 Series
Mates With
Micro-Fit 3.0 Receptacle Housing 43025
<br>Micro-Fit 3.0 Cable Assembly 245132
<br>Micro-Fit 3.0 TPA Receptacle Housing
172952