PRODUCT SPECIFICATION TITLE 824~2170MHZ FLEXIBLE ANTENNA SIDE-FED TABLE OF CONTENTS 1. SCOPE 2. PRODUCT DESCRIPTION 3. APPLICABLE DOCUMENTS 4. GENERAL SPECIFICATION 5. ANTENNA SPECIFICATION 6. MECHANICAL SPECIFICATION 7. ENVIRONMENTAL SPECIFICATION 8. PACKING REVISION: ECR/ECN INFORMATION: A EC No: 619266 DATE: 2019/06/19 DOCUMENT NUMBER: PS-2125700100 TITLE: SHEET No.
PRODUCT SPECIFICATION 824~2170MHZ FLEXIBLE ANTENNA SIDE-FED 1.0 SCOPE This product specification covers the mechanical, electrical and environmental performances specification for 824~2170MHz flexible antenna side-fed. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Product name: 824~2170MHz Flexible Antenna Side-Fed Series Number: 212570XXXX 2.
PRODUCT SPECIFICATION 2.4 PRODUCT STRUCTURE INFORMATION P/N 212570-XXXX Mechanical Structure Information for 212570XXXX REVISION: ECR/ECN INFORMATION: A EC No: 619266 DATE: 2019/06/19 DOCUMENT NUMBER: PS-2125700100 TITLE: SHEET No. 824~2170MHz Flexible Antenna Side-Fed Product Specification CREATED / REVISED BY: CHECKED BY: 3 of 8 APPROVED BY: Kang Cheng 2019/06/13 Cooper Zhou 2019/06/13 Stary Song 2019/06/13 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).
PRODUCT SPECIFICATION 3.0 APPLICABLE DOCUMENTS Document Number Description Sale Drawing (SD) SD-2125700150 Mechanical Dimension of the product Application Guide (AS) AS-2125700150 Antenna Application and surrounding Packing Drawing (PK) PK-2125700150 Product packaging specifications 4.
PRODUCT SPECIFICATION 5.0 ANTENNA SPECIFICATION. All measurements are done of the antenna mounted on a PC/ABS material block of 2mm thickness with VNA Agilent E5071C and Over-The-Air (OTA) chamber. All measurements in this document are done with the part no.2125700150 for different cable length. 5.1 ELECTRICAL REQUIREMENT 5.1.1 ELECTRICAL REQUIREMENTS FOR CABLE LENGHTH 100mm P/N 2125700100 Frequency Range 824-960MHz 1710-2170MHz Peak Gain (Max) -0.45dBi 1.
PRODUCT SPECIFICATION 6.0 MECHANICAL SPECIFICATION All measurements in this document are done with the part no.2125700150 with a cable length of 150mm. DESCRIPTION TEST CONDITION Pull Test 1. Test machine: Max intelligent load tester 2. Stick the flex antenna on a plastic board, pull cable in axial direction.
PRODUCT SPECIFICATION 7.0 ENVIRONMENTAL SPECIFICATION DESCRIPTION SPECIFICATION 1.The device under test is kept for 30 mins in an environment with a temperature of -40 ℃. 2. Kept for 4 Hours in an environment with a temperature of 85 degrees and a relative humidity of 95%. TEMPERATURE /HUMIDITY CYCLING 3. Kept for 2 Hours in an environment with a temperature of 125 degrees and a relative humidity of 95%. 4. The cycle is repeated until a total of 40 cycles have been completed.
PRODUCT SPECIFICATION 8.0 PACKING Packaging Information For 212570XXXX REVISION: ECR/ECN INFORMATION: A EC No: 619266 DATE: 2019/06/19 DOCUMENT NUMBER: PS-2125700100 TITLE: SHEET No. 824~2170MHz Flexible Antenna Side-Fed Product Specification CREATED / REVISED BY: CHECKED BY: 8 of 8 APPROVED BY: Kang Cheng 2019/06/13 Cooper Zhou 2019/06/13 Stary Song 2019/06/13 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).
