Datasheet

APPLICATION SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
824~2170MHz Flexible Antenna Side-Fed
Application Specification
SHEET No.
A
EC No:
619266
17 of 28
DATE:
2019/06/19
DOCUMENT NUMBER:
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
AS-2125700100
Liu Hai 2019/06/13
Cheng Kang 2019/06/13
Andy Zhang 2019/06/13
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
6.0 RF PERFORMANCE AS A FUNCTION OF IMPLEMENTATION
6.1 ANTENNA RF PERFORMANCE AS A FUNCTION OF DIFFERENT LOCATIONS WITH
PARALLEL PLANE GROUND
Four locations with parallel plane ground have been evaluated and these locations are shown in
figure 6.1. The plane ground size is 90mm*90mm and we move the plane ground to four locations
for each test. The distance between the antenna and the parallel plane grounding has some
influence on the low frequency performance of the antenna. We suggest the minimum distance
between the antenna and the plane ground is recommended to be 15mm.
FIGURE 6.1 FOUR LOCATIONS WITH PARALLEL PLANE GROUND
Ground Size: 90mm*90mm;
Location 1: Distance between antenna and plane ground (GAP) is about 5mm;
Location 2: Distance between antenna and plane ground (GAP) is about 10mm;
Location 3: Distance between antenna and plane ground (GAP) is about 15mm;
Location 4: Distance between antenna and plane ground (GAP) is about 20mm.