Datasheet

APPLICATION SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
824~2170MHz Flexible Antenna Side-Fed
Application Specification
SHEET No.
A
EC No:
619266
16 of 28
DATE:
2019/06/19
DOCUMENT NUMBER:
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
AS-2125700100
Liu Hai 2019/06/13
Cheng Kang 2019/06/13
Andy Zhang 2019/06/13
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
5.2 CABLE BENDING
During the assembly of the antenna in a device, the cable needs to be positioned away from the
antenna flex to achieve best performance. The cable must be away from the Flex edge at least
5mm as shown in figure 5.2.1. If the cable bends into the antenna flex, the antenna performance
will be degraded.