Datasheet

APPLICATION SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
2.4/5GHz MIMO 4x4 Flexible Antenna
Application Specification
SHEET No.
A
EC No:
622435
27 of 47
DATE:
2019/08/15
DOCUMENT NUMBER:
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
AS-2123300100
Liu Hai 2019/08/13
Kang Cheng 2019/08/13
Andy Zhang 2019/08/13
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
5.2 CABLE BENDING
During the assembly of the antenna in a device, the cable needs to be positioned away from the
antenna flex to achieve best performance. The cable must be away from the pattern at least 5mm
as shown in figure 5.2.1. If the cable crosses into the antenna flex, the antenna performance will
be degraded.
FIGURE 5.2.1 CABLE BENDING