Datasheet

PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
5.9GHZ FLEXIBLE ANTENNA PRODUCT
SPECIFICATION
SHEET No.
A
EC No:
615953
7 of 9
DATE:
2019/04/20
DOCUMENT NUMBER:
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-2119960100
Kang Cheng 2019/03/22
Cooper Zhou 2019/03/22
Stary Song 2019/03/22
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC
5.2 CABLE LOSS
DESCRIPTION
TEST CONDITION
REQUIREMENTS
Frequency Range
5GHz-6GHz
5.0GHz~6.0GHz
Attenuation
1m cable measured by
VNA5071C
≤5dB/m
Balance antenna resonance is insensitive to cable’s length, but the cable’s loss will affect the
total efficiency.
6.0 MECHANICAL SPECIFICATION
All measurements in this document are done with the part no.2119960100 with a cable length of
100mm.
DESCRIPTION
TEST CONDITION
TEST RESULT
Pull Test
1. Test machine: Max intelligent load tester
2. Stick the flex antenna on a plastic board,
pull cable in axial direction.
Pull force >8N
Un-mating force
(connector)
Solder the receptacle connector to the test
board ,then place the board and plug on
push-on/pull-off machine, and repeat mating
and un-mating 30 cycles at a speed
25±3mm/min. along the mating axis.
Un-mating force : 0.5 kgf min