Datasheet

APPLICATION SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
868/915MHz Flexible Antenna
Application Specification
SHEET No.
A
EC No:
608264
14 of 20
DATE:
2018/12/03
DOCUMENT NUMBER:
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
AS-2111400100
Liu Hai 2018/11/29
Cheng Kang 2018/11/29
Chris Zhong 2018/11/29
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
5.2 CABLE BENDING
During the assembly of the antenna in a device, the cable needs to be positioned away from the
antenna flex to achieve best performance. The cable must be away from the Flex edge at least
5mm as shown in figure 5.2.1. If the cable bends into the antenna flex, the antenna performance
will be degraded.
FIGURE 5.2.1 CABLE BENDING
FIGURE 5.2.2 CABLE ACTIVITY RANGE
FIGURE 5.2.3 CABLE BENDING