Datasheet

APPLICATION SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
698~4000MHz Flexible Antenna
Application Specification
SHEET No.
B
EC No:
613776
27 of 43
DATE:
2019/03/18
DOCUMENT NUMBER:
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
AS-2091420180
Liu Hai 2019/03/18
Cheng Kang 2019/03/18
Andy Zhang 2019/03/18
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
5.2 CABLE BENDING
During the assembly of the antenna in a device, the cable needs to be positioned away from the
antenna flex to achieve best performance. The cable must be away from the Flex edge at least
5mm as shown in figure 5.2.1. If the cable bends into the antenna flex, the antenna performance
will be degraded.
FIGURE 5.2.1 CABLE BENDING
FIGURE 5.2.2 CABLE ACTIVITY RANGE
FIGURE 5.2.3 CABLE BENDING