PRODUCT SPECIFICATION TITLE 2.4/5GHz MIMO 2x2 FLEXIBLE ANTENNA TABLE OF CONTENTS 1. SCOPE 2. PRODUCT DESCRIPTION 3. APPLICABLE DOCUMENTS 4. GENERAL SPECIFICATION 5. ANTENNA SPECIFICATION 6. MECHANICAL SPECIFICATION 7. ENVIRONMENTAL SPECIFICATION 8. PACKING REVISION: ECR/ECN INFORMATION: A EC No: 606016 DATE: 2018/10/19 DOCUMENT NUMBER: PS-2084820100 TITLE: 2.4/5GHz MIMO 2x2 Flexible Antenna Product Specification CREATED / REVISED BY: CHECKED BY: SHEET No.
PRODUCT SPECIFICATION 2.4/5GHz MIMO 2x2 FLEXIBLE ANTENNA 1.0 SCOPE This Product Specification covers the mechanical, electrical and environmental performances specification for 2.4/5GHz MIMO 2x2 Flexible Antenna. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Product name: 2.4/5GHz MIMO 2x2 Flexible Antenna Series Number: 208482 2.2 DESCRIPTION Series 208482 is a 2*MIMO flexible dipole type antenna for high speed WiFi network. It’s made from Poly-flexible material, size form 55.20mm x 19.
PRODUCT SPECIFICATION 2.4 PRODUCT STRUCTURE INFORMATION P/N 208482**** Mechanical Structure Information for 208482**** REVISION: ECR/ECN INFORMATION: A EC No: 606016 DATE: 2018/10/19 DOCUMENT NUMBER: PS-2084820100 TITLE: 2.4/5GHz MIMO 2x2 Flexible Antenna Product Specification CREATED / REVISED BY: CHECKED BY: SHEET No. 3 of 8 APPROVED BY: Kang Cheng 2018/10/15 Cooper Zhou 2018/10/15 Stary Song 2018/10/15 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).
PRODUCT SPECIFICATION 3.0 APPLICABLE DOCUMENTS Document Number Description Sale Drawing(SD) SD-2084820100 Mechanical Dimension of the product Application Guide(AS) AS-2084820100 Antenna Application and surrounding Packing Drawing(PK) PK-2084820100 Product packaging specifications 4.0 GENERAL SPECIFICATION Product name 2.
PRODUCT SPECIFICATION 5.0 ANTENNA SPECIFICATION All measurements are done of the antenna mounted on a PC/ABS material block of 1mm thickness with VNA Agilent 5071C and Over-The-Air (OTA) chamber. All measurements in this document are done with the part no.208482**** for different cable length. 5.1 ELECTRICAL REQUIREMENT 5.1.1 ELECTRICAL REQUIREMENTS FOR CABLE LENGHTH 100mm P/N 2084820100 Port Port1 Frequency Range Port2 2400-2500MHz 5150-5850MHz 2400-2500MHz 5150-5850MHz 2.9 dBi 5.0 dBi 3.
PRODUCT SPECIFICATION 5.2 CABLE LOSS DESCRIPTION TEST CONDITION REQUIREMENTS Frequency Range 2.4GHz/5GHz 2.4GHz~2.5GHz 5.15GHz~5.85GHz Attenuation 1m cable measured by VNA5071C ≤3.5dB/m ≤5dB/m 6.0 MECHANICAL SPECIFICATION DESCRIPTION TEST CONDITION Pull Test 1. Test machine: Max intelligent load tester 2. Stick the flex antenna on a plastic board, pull cable in axial direction.
PRODUCT SPECIFICATION 7.0 ENVIRONMENTAL SPECIFICATION DESCRIPTION SPECIFICATION 1.The device under test is kept for 30 mins in an environment with a temperature of -40 ℃. 2. Kept for 4 Hours in an environment with a temperature of 85 degrees and a relative humidity of 95%. 3. Kept for 2 Hours in an environment with a temperature of 125 degrees and a relative humidity of 95%. Temperature /Humidity cycling 4. The cycle is repeated until a total of 40 cycles have been completed.
PRODUCT SPECIFICATION 8.0 PACKING PACKAGING INFORMATION FOR 208482**** REVISION: ECR/ECN INFORMATION: A EC No: 606016 DATE: 2018/10/19 DOCUMENT NUMBER: PS-2084820100 TITLE: 2.4/5GHz MIMO 2x2 Flexible Antenna Product Specification CREATED / REVISED BY: CHECKED BY: SHEET No. 8 of 8 APPROVED BY: Kang Cheng 2018/10/15 Cooper Zhou 2018/10/15 Stary Song 2018/10/15 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).
