Datasheet

APPLICATION SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
2.4/5GHz Flexible Antenna
Application Specification
SHEET No.
C
EC No:
612233
12 of 21
DATE:
2019/03/13
DOCUMENT NUMBER:
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
AS-2069940100
Hai Liu 2019/02/18
Andy Zhang 2019/02/18
Chris Zhong 2019/02/18
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
5.2 CABLE BENDING
During the assembly of the antenna in a device, the cable needs to be positioned away from the
antenna flex to achieve best performance. The cable must be away from the pattern at least 5mm
as shown in figure 5.2.1. If the cable crosses into the antenna flex, the antenna performance will
be degraded.
FIGURE 5.2.1 RECOMMENDED CABLE BENDING RANGE
FIGURE 5.2.2 UNRECOMMENDED CABLE BENDING RANGE
FIGURE 5.2.3 MULTIPLE BENDING OF CABLES IS NOT RECOMMENDED