Datasheet

APPLICATION SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
868/915MHz Dipole Flexible Antenna
Application Specification
SHEET No.
B
EC No:
626150
2 of 20
DATE:
2019/10/23
DOCUMENT NUMBER:
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
AS-2067640100
Liu Hai 2019/10/23
Cheng Kang 2019/10/23
Andy Zhang 2019/10/23
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
868-915MHZ DIPOLE FLEXIBLE ANTENNA
1.0 SCOPE
This specification describes the antenna application and surrounding. The information in this
document is for reference and benchmark purposes only. The user is responsible for validating
antenna RF performance based on the user’s actual implementation.
Although this document AS-2067640100 is for U.FL compatible connector and 100mm cable, it is
applicable to all products under 206764 series. All measurements in this document are done with
the part no.2067640100 with a cable length of 100mm, it is used to illustrate the product
application. The document is applicable to all cable length as well.
Antenna illustrations in this document are generic representations. They are not intended to be an
image of any antenna listed in the scope.
2.0 PRODUCT DESCRIPTION
2.1 PRODUCT NAME AND SERIES NUMBER (S)
Product name: 868/915MHz Dipole Flexible Antenna
Series Number: 206764
2.2 DESCRIPTION
Series 206764 is similar to series 105262, both series are flexible antenna with cable enable
direct connection to host PCB, both cover a typical dual band ISM from 863 – 928MHz.
The difference is 206764 is standard dipole type, the antenna size is a little larger but
performance is better than 105262.
2.3 PRODUCT STRUCTURE INFORMATION
Please refer to PS-2067640100 for full information.
Molex 206764 Series 868/915MHz Dipole Flexible Antenna 3D View