Datasheet

APPLICATION SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
2.4/5G WIFI ANTENNA WITH SIDE
SOLDER CABLE
SHEET No.
C
EC No:
171309
2 of 32
DATE:
2018/01/24
DOCUMENT NUMBER:
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
AS-2042810100
Benson Liu 2018/01/24
Kang Cheng 2018/01/24
Chris Zhong 2018/01/24
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
2.4/5GHZ WIFI DUAL BAND ANTENNA WITH SIDE SOLDER CABLE
1.0 SCOPE
This specification describes the antenna application and surrounding. The information in this
document is for reference and benchmark purposes only. The user is responsible for
validating antenna RF performance based on the user’s actual implementation.
Although this document AS-2042810100 is for U.FL compatible connector and 100mm cable,
it is applicable to all products under 204281 series. All measurements in this document are
done with the part no.2042810100 with a cable length of 100mm, it is used to illustrate the
product application. There is no different between the performances for 204810100 and
204811100. The document is applicable to all cable length as well.
Antenna illustrations in this document are generic representations. They are not intended to
be an image of any antenna listed in the scope.
2.0 PRODUCT DESCRIPTION
2.1 PRODUCT NAME AND SERIES NUMBER (S)
Product name: 2.4/5GHz WIFI Dual Band Antenna with Side Solder Cable
Series Number: 204281
2.2 DESCRIPTION
Series 204281 is a balanced, side-fed, dipole-type, high efficiency antenna for 2.4/5 GHz
applications, including WiFi, Bluetooth, Zigbee and others. This antenna is made from poly-
flexible material with small size 35*11*0.1mm, and has double-sided adhesive tape for easy
“peel and stick” mounting. This balanced antenna with ground plane independent design
offers various cable length options for ease of integration into various devices.
2.3 PRODUCT STRUCTURE INFORMATION
Please refer to PS-2042810100 for full information.
Molex 204281XXXX 2.4/5GHz Wide dual band Antenna 3D View