Brochure

Order No. 987651-1024 Rev 2 APS/0k/KC/2016.02 ©2016 Molex
www.molex.com/link/ditto.html
Ditto
TM
Wire-to-Wire
Connectors with Positive and
Friction Lock
Applicable Wiring
The table below shows the range and sizes of
UL style wires supported by the Ditto connector
system
Barrel-type terminals are used for universal
support of a variety of wire gauge and styles
Product and Technical Differences
Attribute Friction-lock Housing Positive-lock Housing
Type Genderless wire-to-wire interconnect solution
Pitch 2.50mm 3.00mm
Current rating 5.6 to 8.0A max. 4.2 to 5.0A max.
Applicable wire sizes 26 to 20 AWG
Voltage rating 350V 350V
Genderless connector Yes Yes
Mated length 30.70mm 30.70mm (without TPA accessory)
Mated volume (mm and by %) 2,165 mm
3
(without ears) 2,870 mm
3
(with ears) 3,960mm
3
Crimp Terminal Design Reinforced, sheared locking tang ensures no terminal back-out Reinforced wing-style feature-protected locking tang
Special Features Friction lock used for connector mating Dual positive lock on housing ensures no accidental disconnects
Wire Size Max Outer Diameter (mm)
AWG UL 1007 UL 1061
26 1.40 1.05
24 1.50 1.15
22 1.70 1.35
20 N.A. 1.55
Positive Lock Crimp Housings Friction Lock Crimp Housing 6 or 12-inch Pigtail Wire Harnesses
Non Glow wire versions Glow wire Capable Non-Glow wire version
150207
150170 150201 36877
Crimp Terminals, reinforced, wing-shaped (used with Positive Lock
Crimp Housings)
Crimp Terminals
(for use with Friction Lock Crimp Housings)
150200 (Tin-Brass) 36876
Application Tooling
Terminal
Insulation
Diameter
Strip Length
Applicator Hand Tool Extraction Tool
63903-8400 63827-8500
63813-1400
150200-0001
(AWG: 20 to 22)
1.70 to 1.35mm
2.3 to 2.8mm
63903-8500 63827-8600
150200-0002
(AWG: 24 to 26)
1.50 to 1.05mm
Ordering Information
Unique And Useful Differentation
vs. Similar Ditto
TM
Connectors