Datasheet

PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
Rectangular Standard NFC
Antenna Product Specification
SHEET No.
B1
EC No:
626150
10 of 12
DATE:
2019/10/23
DOCUMENT NUMBER:
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-1462360001
Kang Cheng 2019/10/17
Cooper Zhou 2019/10/17
Stary Song 2019/10/17
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC
6.0 ENVIRONMENTAL SPECIFICATION
DESCRIPTION
SPECIFICATION
High Temperature
1. Temperature:85℃ (±2℃), Time:240H
2. No cosmetic problem (No soldering problem; No adhesion
problem of glue.
Low Temperature
1. Temperature:-40℃ (±3℃), Time:240H
2. No cosmetic problem（No soldering problem；No adhesion
problem of glue）.
High Humidity & High
Temperature
1.Temperature:85℃ (±2℃),Humidity:85%, Time:96H
2. No cosmetic problem（No soldering problem；No adhesion
problem of glue）.
Temperature Cycling
1. Mate antenna and subject to the following conditions for 48
cycles.
1 cycle of:
a. – 40±3°C 30 minutes
b. + 85±2°C 30 minutes
Shift time：Within 5 minutes
2. No cosmetic problem（No soldering problem；No
adhesion problem of glue）.
Salt Mist Test
1. NaCl solution
Concentration: 5±1 %
Spray time: 48±4 hours
Ambient temperature: 35±2 °C
2. No visible corrosion.
3. Discoloration accepted.
Pull Test
1. Stick the NFC on a metal board, Cable keeps parallel to
flex plane. pull cable in horizontal direction.
2. Test speed：10-15 mm/min.
3. Pull force >8N