PRODUCT SPECIFICATION TITLE 2.4/5GHz BALANCE PCB ANTENNA TABLE OF CONTENTS 1.0 SCOPE 2.0 PRODUCT DESCRIPTION 3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS 4.0 RATINGS 5.0 PERFORMANCE 6.0 TEST GROUPINGS 7.0 PACKING REVISION: ECR/ECN INFORMATION: TITLE: D1 EC No: 122478 DATE: 2017/08/30 DOCUMENT NUMBER: PS-1461870100 SHEET No. 2.
PRODUCT SPECIFICATION 2.4/5GHz BALANCE PCB ANTENNA 1.0 SCOPE This Product Specification covers the mechanical, electrical and environmental performances requirements and test methods for 2.4/5GHz Balance PCB Antenna with solder cable. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Product name: 2.4/5GHz BALANCE PCB ANTENNA 146187 2.2 Design and Construction Antenna construction and physical dimensions specified on the applicable sales drawing. 2.
PRODUCT SPECIFICATION 5.0 PERFORMANCE 5.1 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 50mm (1461870050) ITEM DESCRIPTION TEST CONDITION REQUIREMENTS 5.1.1 Frequency Range 2.4GHz~5.93GHz 5.1.2 Return Loss Antenna with 100mm long, 1.13mm diameter micro coaxial cable in free space. Measured by VNA5071C 5.1.3 Peak Gain Measure antenna in free space through OTA chamber 3.4 dBi 4.75 dBi 5.1.4 Total Efficiency Measure antenna in free space through OTA chamber >85% >79% 5.1.
PRODUCT SPECIFICATION 5.3 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 150mm (1461870150) ITEM DESCRIPTION TEST CONDITION REQUIREMENTS 5.3.1 Frequency Range 2.4GHz~5.93GHz 5.3.2 Return Loss Antenna with 100mm long, 1.13mm diameter micro coaxial cable in free space. Measured by VNA5071C 5.3.3 Peak Gain Measure antenna in free space through OTA chamber 3.0 dBi 4.2 dBi 5.3.4 Total Efficiency Measure antenna in free space through OTA chamber >76% >70% 5.3.
PRODUCT SPECIFICATION 5.5 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 250mm (1461870250) ITEM DESCRIPTION TEST CONDITION REQUIREMENTS 5.5.1 Frequency Range 2.4GHz~5.93GHz 5.5.2 Return Loss Antenna with 100mm long, 1.13mm diameter micro coaxial cable in free space. Measured by VNA5071C 5.5.3 Peak Gain Measure antenna in free space through OTA chamber 2.6 dBi 3.7 dBi 5.5.4 Total Efficiency Measure antenna in free space through OTA chamber >70% >63% 5.5.
PRODUCT SPECIFICATION Balance antenna resonance is insensitive by cable’s length, but the cable’s loss will affect the totally efficiency. Refer to 5.7 5.9 MECHANICAL REQUIREMENTS ITEM DESCRIPTION 5.9.1 Pull test TEST CONDITION REQUIREMENT Test machine : Max intelligent load tester fixed the PCB antenna in an instrument, pull cable in horizontal direction. Pull force > 8 N 5.10 ENVIRONMENTAL REQUIREMENTS ITEM 5.10.1 5.10.
PRODUCT SPECIFICATION 5.10.3 5.10.4 High Temperature Test condition: Temperature:125℃, time:1008hours There is no substantial obstruction to air flow across and around the samples, and the samples are not touching each other Parts should meet RF spec before and after test. No cosmetic problem 1.Test condition: The device under test is exposed to a spray of a 5% (by volume) resolution of Nacl in water for 2 hours.
