Datasheet

Extractor Tool for Mini-Fit ™ Series Terminals
Doc No: ATS-011030044 Release Date: 03-01-05 UNCONTROLLED COPY Page 3 of 3
Revision: F Revision Date: 04-16-08
NOTE:
When a terminal is removed in this manner the locking
tangs are damaged and the terminal is not reusable.
Terminal and Housing Application Chart
Terminal Series No. Used with Housing Series No.
44478-**2* 44157
44476 44156
Uses Extractor Tool
No. 63813-1200
only for these
Terminal and Housing Combinations.
Molex does not offer repair parts for Extractor Tools due to the inexpensive nature of these tools
Americas Headquarters
Lisle, Illinois 60532 U.S.A.
1-800-78MOLEX
[e-mail]
Far East North Headquarters
Yamato, Kanagawa, Japan
81-462-65-2324
[e-mail]
Far East South Headquarters
Jurong, Singapore
65-6-268-6868
[e-mail]
European Headquarters
Munich, Germany
49-89-413092-0
[e-mail]
Corporate Headquarters
2222 Wellington Ct.
Lisle, IL 60532 U.S.A.
630-969-4550
Fax: [phone]
Visit our Web site at http://www.molex.com
EXTRACTOR TOOL
FINGERS MUST BE ON
THE OUTSIDE OF THE
TERMINAL CONTACTS
Figure 2
(HOUSING
REMOVED)
LOCKING TABS
DEPRESSED
TERMINAL
EXTRACTOR
TOOL