Datasheet
HTA2174 Extractor Tool
Doc No: ATS-011030016 Release Date: 01-31-02 UNCONTROLLED COPY Page 2 of 3
Revision: K Revision Date: 02-15-16
CONNECTOR
HOUSING
Figure 1
LOCKING TAB
CONNECTOR
HOUSING
EXTRACTOR
TOOL
EXTRACTOR
TOOL
TERMINAL
CONNECTOR
HOUSING
Figure 2
LOCKING
TAB
WIRE
EXTRACTOR
TOOL
EXTRACTOR
TOOL
TERMINAL
LOCKING
TAB
TERMINAL
Terminal
Series No.
Description
Housing
Series No.
Terminal Order No.
7258
3.96mm (.156") Pitch
KK® Trifurcon,
22-26 AWG
6422
41695
08-04-0001
08-50-0183
08-50-0185
08-50-0283
08-52-0124
08-52-0125
08-56-0123
08-56-0124
08-56-0181
08-56-0182
08-58-0133
08-58-0134
08-65-0121
08-65-0122
08-65-0126
08-65-0127
45570
3.96mm (.156") Pitch
MarKK® Trifurcon
18 to 20 AWG
6422
41695
45570-3000
45570-3002
45570-3004
45570-3050
45570-3052
45570-3054
45570-3102
45570-3104
45570-3202
455703204
45606
3.96mm (.156”) Pitch KK
Humpback with
Anti-Fish Hook 18 AWG
40611
45606-0004
45606-0005
50639
2.00mm (.079") Pitch
Crimp Terminal, Male
51145
50639-8028
50639-8128
50837
2.50mm (.098") Pitch
Mini-Lock™
51198
50837-8000
50837-8100
172160
3.96mm Pitch
EdgeMate™18-20AWG
172159
172879
172160-1801
172160-1802
172160-1803
172160-1804
172160-1805
172160-1806
172253
Ultra-Fit Receptacle
Terminals16-22 AWG
172256
172258
172253-3011
172253-3012
172253-3023
172253-3111
172253-3112
172253-3123
Note: All Individual terminals may be
extracted from the housing using this
Tool.
OPERATION:
1. Insert the Extractor Tool into the
slot on the bottom of the connector
housing as shown in Figure 1.
2. Depress the terminal-locating tab,
push the terminal back through the
connector slot and pull the
terminated wire out in the direction
of the arrow as shown.
3. On housings without exposed locking tab windows,
insert as shown in Figure 2 to depress locking tab and
pull wire out.
Note:
If the terminal does not extract, reinsert the Extractor
Tool as shown in Figure 2 and slightly rotate clockwise
(CW) and counter-clockwise (CCW) several times to
depress the locking tab. Pull on the wire to extract the
terminal.