PRODUCT SPECIFICATION TITLE 868/915MHz ISM STAND ALONE ANTENNA TABLE OF CONTENTS 1. SCOPE 2. PRODUCT DESCRIPTION 3. APPLICABLE DOCUMENTS AND SPECIFICATIONS 4. RATINGS 5. PERFORMANCE 6. TEST GROUPINGS 7. PACKING REVISION: ECR/ECN INFORMATION: TITLE: C EC No: 122214 DATE: 2017/09/22 DOCUMENT NUMBER: PS-105262-001 SHEET No.
PRODUCT SPECIFICATION 868/915MHz ISM STAND ALONE ANTENNA 1.0 SCOPE This Product Specification covers the mechanical, electrical and environmental performances requirements and test methods for 868/915MHz ISM Stand Alone Antenna. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Product name: 868/915MHz ISM Standalone Antenna 105262. Sub number for 100 mm cable is 0001. Sub number for 150 mm cable is 0002. Sub number for 200 mm cable is 0003. 2.
PRODUCT SPECIFICATION 5.0 PERFORMANCE 5.1 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 100mm (105262-0001) ITEM DESCRIPTION TEST CONDITION REQUIREMENT 5.1.1 Frequency Range 500 – 3000 MHz 5.1.2 Reflection 20*log10(|S11|) 50 Ohm 5.1.3 Peak Gain Measure antenna on PC plate in anechoic chamber. 0.4 dBi 1.4 dBi 5.1.4 Total Efficiency Measure antenna on PC plate in anechoic chamber > -3.0 dB > -1.8 dB 5.1.
PRODUCT SPECIFICATION 5.3 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 200 mm (105262-2001) ITEM DESCRIPTION TEST CONDITION REQUIREMENT 5.3.1 Frequency Range 500 – 3000 MHz 5.3.2 Reflection 20*log10(|S11|) 50 Ohm Antenna flex placed in center off 120 x 120 x 2.5 mm3 PC plate and fed via 100mm of 1.13mm micro coax cable. 5.3.3 Peak Gain Measure antenna on recommended PC plate in anechoic chamber. 0.2 dBi 1.2 dBi 5.3.
PRODUCT SPECIFICATION 5.6 ENVIRONMENTAL REQUIREMENTS ITEM DESCRIPTION 5.6.1 1.Test condition: The device under test is kept for 12 hours in an environment with a temperature of 55 degrees and a relating humidity of 95%. 1) Parts should meet RF Thereafter for 12 Hours in an environment with Humidity Test spec before and after test. a temperature of 25 degrees and a relative 2） No cosmetic problem humidity of 95%. The cycle is repeated until a total of 6 cycles have been completed.
PRODUCT SPECIFICATION 6.0 TEST GROUPINGS Test Item Description Group1 5.4.1 Pull test X 5.4.4 Solderability testing 5.5.1 Cross section 5.6.1 Humidity Test 5.6.2 Temperature cycling test 5.6.3 Salt mist test Group2 Group3 Group4 Group5 Group6 X X X X Sample Quantity X 5 5 5 5 5 5 7.0 PACKAGING Refer to the Molex related packaging drawings of PK-105262-001. REVISION: ECR/ECN INFORMATION: TITLE: C EC No: 122214 DATE: 2017/09/22 DOCUMENT NUMBER: PS-105262-001 SHEET No.
