Datasheet

APPLICATION SPECIFICATION
REVISION: ECR/ECN INFORMATION: TITLE:
868, 915 MHz ISM Standalone Antenna
Application Specification
SHEET No.
A
EC No:
ABU2013-0068
1 of 3
DATE:
17 May 2013
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
AS
-
105262
-
0
001
Ryan Liu Ethan Zhong Welson Tan
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
868, 915 MHZ ISM STANDALONE ANTENNA
1. Scope
1.1. This specification describes the antenna application. The information in this document is for reference
and benchmark purposes only. The user is responsible for validating antenna RF performance based
on the user’s actual implementation.
2. Product Description
2.1. Product Name and Series Number
2.1.1. Product name: 868/915MHz ISM Standalone Antenna 105262-****
2.1.2. Sub number for 100 mm cable is 0001.
2.1.3. Sub number for 150 mm cable is 0002.
2.1.4. Sub number for 200 mm cable is 0003.
2.2. 2.2 Design and Construction
2.2.1. Antenna shall be of the design, construction and physical dimensions specified on the
2.2.2. Applicable sales drawing.
2.3. Materials
2.3.1. Flex: Refer to respective Molex sales or engineering drawings
2.3.2. Plating: Refer to respective Molex sales or engineering drawings
2.3.3. Cable Line: Refer to respective Molex sales or engineering drawings
2.3.4. Connector: Refer to respective Molex sales or engineering drawings
3. Applicable Documents and Specification
3.1. See drawings for the relevant reference documents. In the case where the specification differs from
the drawings, the drawings take precedence.
4. Ratings
4.1. Impedance: 50ohm
4.2. RF Power : 2 Watt Max
4.3. Temperature Range
4.3.1. Operating: - 30°C to + 75°C
4.3.2. Storage: - 30°C to + 75°C
4.4. Humidity
4.4.1. Storage: +15~70% RH
4.4.2. Test: +80~95% RH
5. Specification
5.1. Please refer to the specification PS-1015262-001