Use and Care Manual

Settings
• Standby
Powers down the fan and UV lights. Wake by tapping the screen.
• Device details
Access the device name, serial number, and firmware version.
• Languages
Change language settings.
• Reset
Erase all of the previously configured settings of your Air Pro, such as WiFi
networks and last-used fan speed. If you had previously turned off the WiFi
signal, it will turn back on.
• Disable WiFi
You can disable and re-enable WiFi here. This will prevent you from
controlling your device with the mobile app.
Fan speed selector
Navigate between Auto Protect (Standard or Quiet) and manual modes
(fan speeds 1-6).
Auto Protect – Standard
Auto Protect uses the PM sensor to measure airborne particulate
matter levels and regulate fan speed for optimal air purification.
Auto Protect – Quiet
This setting also uses the PM sensor and regulates the fan, but will not
run at high fan speeds, staying quiet while still maintaining effectiveness.
Please note: in this mode, rooms with detected levels of particles will
typically take longer to clean compared to standard Auto Protect mode.
Manual
Lets you cycle manually between the six fan speeds, from 1 (Low)
to 6 (Boost).
Modes & states
04