Molekule Air Pro User Manual
READ AND SAVE THESE INSTRUCTIONS
01 Best practices Place it in a big space. Air Pro will work in any room, but giving it space away from walls will help maximize clean air circulation. It’s designed for large, multi-usage rooms, up to 800 sq. ft., like offices, large bedrooms, living rooms, and open floor plans. Run it 24/7. Air Pro uses low energy to keep fresh air flowing.
02 Setting up Place away from walls for optimal airflow. Push down on center core, Remove PECO-Filter Align red line inside shell Push down and turn Unwind cord and plug Download the Molekule turn counterclockwise from plastic wrapper with red line on core so it clockwise until it into power outlet. app to complete setup and release. Core will rise and place back in. falls into place. locks into place. on its own. Lift it off. and enable control from your phone.
03 04 Controls & interface Modes & states Tap the touch screen once to awaken your device and get a glance at the PM sensor level and current status of your Air Pro. Home screen See your overall particle level, from Good (green) to Very bad (purple). Your fan-speed Home screen Good PM10 Moderate PM2.5 Good mode is displayed at the top. Access the fan-speed menu by swiping or tapping Swipe left and right to switch between the top of the screen.
04 Modes & states PECO-Filter status Track the status of your PECO-Filter and see when your next filter refill is scheduled to ship. Good There’s no need to replace your PECO-Filter. Replace soon Your PECO-Filter is nearing recommended replacement time. Replace Your PECO-Filter has reached recommended replacement time. Replace the existing one. Replace now Your PECO-Filter should be replaced immediately because it has exceeded its recommended replacement time.
04 Modes & states Fan speed selector Navigate between Auto Protect (Standard or Quiet) and manual modes (fan speeds 1-6). Auto Protect – Standard Auto Protect uses the PM sensor to measure airborne particulate Settings • Powers down the fan and UV lights. Wake by tapping the screen. • • Please note: in this mode, rooms with detected levels of particles will Languages Change language settings.
05 What Air Pro senses in the air A window into your air The laser-based sensor in Air Pro is designed to detect particles, giving you a window into the air in the room it’s operating in, to help maintain clean air. Using a laser and light-sensitive detector, the sensor counts particles that reflect light Sensor’s range of detection and gauges how much of it is in the air. Airborne particles, or particulate matter (PM), can contain a range of microbes, allergens, and bacteria.
06 Auto Protect & particle levels Understanding Auto Protect and particle levels Molekule’s particle levels Auto Protect uses the laser-based particle sensor to take automatic readings The scale and color levels on your Air Pro measure particle concentration on a of the air in front of it and adjusts fan speed for optimal air purification in the four-tiered scale. Your device sensor is designed only to reflect the presence of room in which it’s running.
06 Auto Protect & particle levels Particle levels Good Moderate Bad Very bad Your Air Pro is detecting a low level Your Air Pro is detecting a moderate Your Air Pro is detecting a high level Your Air Pro is detecting a very of particles in the room. level of particles in the room. of particles in the room. high level of particles in the room.
07 Auto Protect & particle levels Particle sensor Your Air Pro’s sensor measures different particle sizes in a cross section of the air of the room it’s operating in, giving you insight into your air. It can sense three sizes of particles, known as PM (particulate matter): • PM10: Coarse particles 10 microns or smaller in width (about 1/5th of a human hair). Includes pollen, bits of mold, dander, and other matter common to indoor air. • PM2.5: Fine particles 2.
08 How do I replace the filter? User servicing instructions Push down on center core, turn Remove used PECO-Filter and Align red line inside shell with red Push down and turn clockwise until counterclockwise and release. Core discard. Unwrap new PECO-Filter line on core so it falls into place. it locks into place. will rise on its own. Lift it off. and place in device.
09 10 Help & support Frequently asked questions We’re here to help. If you have issues with your device, filter, app or account: How do PECO-Filter auto-refills work? Air Pro ships with one PECO-Filter. We offer a PECO-Filter auto-refill plan to help Visit us ensure you have clean air when you need it by shipping PECO-Filters automatically help.molekule.com to your doorstep.
10 Frequently asked questions Why is my device’s filter status red and device shutting down? Why won’t my device power on? We understand that our customers lead busy lives and may forget to change If you touch the device display and it doesn’t turn on, follow these recommended steps: the filter, which prevents them from having the cleanest air possible.
11 Safety precautions & warnings Never place any objects on top of the unit. Do not place the unit directly below a The LEDs in your Molekule Air Pro are meant to last the lifetime of the product. shelf or other objects that might hinder the exiting air flow. Never cover vents while Do not attempt to repair or replace these LEDs without explicit instruction and the unit is running. Avoid dropping the device or placing the device on an uneven approval from Molekule.
Disclaimer Your Molekule Air Pro’s sensor is intended be comparable to other commercially The sensor in your Molekule device only detects particulate matter. All other types available consumer air sensors. At sufficient concentrations, it is sensitive to all of pollution are not included in the levels reported.
12 Limited warranty information Molekule warrants that for a period of two years from shipment, your Molekule Molekule’s sole obligation under this warranty will be at its option to repair or Air Pro unit (the “Product”) will be free from defects in materials and workmanship replace the Product and the replaced Product will be warranted for the remaining under normal use in accordance with the documentation provided with the period of the original warranty.
13 FCC statement This device complies with part 15 of the FCC Rules. Operation is subject to the Changes or modifications not expressly approved by the party responsible for following two conditions: (1) This device may not cause harmful interference, and compliance could void the user’s authority to operate the equipment. (2) this device must accept any interference received, including interference that may cause undesired operation.
14 IC statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). 1 à 11 peuvent être exploités. Sélection d’autres canaux n’est pas possible. Operation is subject to the following two conditions: IC Radiation Exposure Statement 1. This device may not cause interference.
426-0066-01 Version 01
