Installation Guide
Molekule devices only connect to a 2.4GHz
wireless network. Note that some routers are
capable of 2.4GHz but have it disabled by default.
Please consult your router documentation for
details specic to your router.
iOS 12.1 or later. Compatible with iPhone, iPad
and iPod touc
Android 8.0 and up
The Molekule app uses WPA2 as a security type for
your WiFi credentials, which is an industry standard.
Currently, Molekule does not support authenticating
the credentials for WiFi on a browser. If you have an
internet connection that does not have a standard WiFi
name and password-based login, you will not be able
to bring your Molekule purier online. Some public
internet connections have such browser-based
authentications
Hotspots may be congured on a smartphone or tablet
with a mobile network data plan to allow Internet
access to other devices via Bluetooth pairing or if both
the hotspot device and the device/s accessing it are
connected to the same Wi-Fi network. To learn how to
setup a mobile hotspot, we recommend reaching out to
your mobile provider for details.
Minimum WiFi requirements:
Minimum iPhone or Android phone
requirements:
Additional Information
How to pair and connect your Molekule purier to WiFi
The device mode information screen will
appear. Click Done to complete setup.
Set up lter auto-rells by
scrolling to the bottom of the
screen and tapping Activate
auto-rells.
Tap Remind me later to skip
this step.
14
13
04