Full Product Manual

Particle Levels
06
Understanding Auto Protect and particle levels
Auto Protect uses the particle sensor to take automatic readings of the air in
front of it and adjusts fan speed for optimal air purification in the room in which
it’s running. Based on the density of particles it detects in that room, the sensor
triggers a colored light to appear on the very center of your device’s display. It’s
important to note that air pollution is more than just particles. While your device
may show a low level of particles in the air, the presence of other pollutants would
remain undetected by the particle sensor.
Molekule’s particle levels
The scale and color levels on your Molekule Air Mini+ measure particle concentration
on a four-tiered scale. Your device sensor is designed only to reflect the presence
of particles in a cross section of your air, not the overall air quality, which would
be based on measurements of many different types of air pollutants. A “Good”
reading on your device may mean a low volume of particles detected in the air, but
air pollution is complex and based on hundreds of factors. As such, the presence
of other pollutants would remain undetected by the device’s particle sensor, which
could affect overall air quality. The recommendations on the following pages are
based solely on the levels of particles detected by the sensor.
Good Moderate
Bad
Very bad