Full Product Manual

PECO-Filter Status
The PECO-Filter status indicator helps you track the replacement schedule for your
PECO-Filter.
• Authentication
Each time you plug in your device or lock its shell into place, it checks the
authenticity of the PECO-Filter. A pulsing white light indicates it’s in progress.
A green light indicates it’s confirmed as a certified Molekule PECO-Filter and
will run normally. A red light indicates the PECO-Filter has not been verified
and the device will not start.
• Off
If the PECO-Filter status indicator is off, there’s no need to replace your
PECO-Filter.
• Orange
An orange light indicates your PECO-Filter is nearing recommended
replacement time.
• Red
A red light indicates your PECO-Filter has reached recommended
replacement time. Replace the existing PECO-Filter.
• Flashing red & white
Flashing red-and-white lights indicate your PECO-Filter should be replaced
immediately because it has exceeded its recommended replacement time.
The device will go on standby, the PECO-Filter status indicator will flash red,
and the fan speed lights will pulse white as a reminder to replace. You can
restart Molekule Air Mini+ by tapping the center button on top of your device.
Molekule Air Mini+ will repeatedly go on standby after extended use until the
PECO-Filter is replaced.