User Manual

Replacing Your Filters
09
Open the device by placing your
hands on the top, push down on
the filter cabinet, and rotate the
inner lid counter clockwise.
PECO-Filter: Lift the lid to pull it
out of the device. Pop the lid off
the old PECO-Filter.
Pre-Filter: Slide the Pre-Filter
drawer out from the bottom of the
device.
To replace the PECO-Filter:
Remove any packaging and attach
the lid of the device to the top of
your new PECO-Filter.
To replace the Pre-Filter:
Remove the old Pre-Filter from
its drawer and discard it.
Remove any packaging from your
new Pre-Filter and place it inside
the drawer with text right-side
up. Slide the drawer back into
the Molekule.