Quick Start Guide
01 Your Molekule Touch Screen PECO-Filter Pre-Filter
02 03 Setting Up Device Menu Download the Molekule app to your phone and set it up using the same email Tap once to wake up the touch screen and twice to access the menu. Swipe left and used to purchase your Molekule device. right to switch between the four menu items. Unwrap the power cord and insert into the bottom of your device. Plug the cord into an outlet and follow the on-screen steps on top of the Molekule. To pair the device to your phone, make sure you’re within 15 feet of the unit.
04 05 Modes Initial Clean Up Auto This mode takes your inputs, like room size, to identify the ideal airflow Once started, your device performs the Initial Clean Up, adapting its cleaning for your device. The fan speed will be set at a consistent level to cycle based on your needs and the size of your room. This calibration ensures your maintain optimal air quality. Molekule works as efficiently as possible no matter what room you place it in. In Boost Mode, the device runs at its maximum speed.
07 How Molekule Works After two decades of research and development, a fundamentally new approach to air purification has arrived at your home. The technology inside your Molekule is called Photo Electrochemical Oxidation (PECO) and works at the molecular level to eliminate indoor air pollution. Our process works by shining light on a specially coated PECO-Filter.
08 Molekule Filter Replacements Filters Filter Replacement Molekule uses two filters at once: A carbon Pre-Filter and a PECO-Filter. To keep your device running as efficiently as possible, the Pre-Filter should The Pre-Filter captures larger particles like dust and pet hair, while be replaced every three months, and the PECO-Filter should be replaced carbon catches and slows down VOCs on their way to the PECO-Filter. every six months.
09 Replacing Your Filters Open the device by placing your PECO-Filter: Lift the lid to pull it To replace the PECO-Filter: To replace the Pre-Filter: hands on the top, push down on out of the device. Pop the lid off Remove any packaging and attach Remove the old Pre-Filter from the filter cabinet, and rotate the the old PECO-Filter. the lid of the device to the top of its drawer and discard it. your new PECO-Filter. Remove any packaging from your inner lid counter clockwise.
10 Get the Most from Your Molekule Where should I place my Molekule? While your Molekule will continue to work in any room, placing it in a central location and on a raised surface will help you maximize its benefits. At night, put Molekule close to your bed for a clean, healthy sleep breathing zone. Should I run my Molekule 24/7? For continuous, fresh, clean air, we suggest running your Molekule on Auto Mode.
12 Safety Precautions & Warnings To avoid injury, keep fingers clear of Pre-Filter opening when pushing down the Do not alter, clean or tinker with the Pre-Filter or PECO-Filter. Changes or damage outer tube. For that reason, avoid operating the unit with two people at the to the Pre-Filter or PECO-Filter may interfere with proper operation. same time. Do not clean the device with any liquid cleaning agents or water.
Fuse Replacement Instructions: WARNING: To reduce the risk of fire or electric shock, do not use this device with Grasp plug and remove from the electrical outlet. any solid-state speed control device. Do not unplug by pulling on cord. When replacing filters, be sure to reinstall both the Pre-Filter Carrier and Top Cover Open the fuse access cover by sliding the tab toward the plug’s prongs. as previously installed. The Pre-Filter Carrier houses the Pre-Filter.
13 14 Limited Warranty Information Patents Molekule warrants that for a period of one year from shipment, the Product will be free from defects in © Molekule Inc. 2017. All Rights Reserved. materials and workmanship under normal use in accordance with the documentation provided with the Molekule’s technology is covered by multiple U.S. and foreign patents. Product. In the event of a defect, visit Molekule at molekule.com/contact for return instructions. For patent information, go to molekule.
15 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Please Recycle v.6.
