Specification Sheet

WARNING TO USER
1. Use these laboratory derived attenuation data for comparison
purposes only. The amount of protection afforded in field use often
is significantly lower depending upon how the protectors are fitted and worn.
2. Failure to follow all instructions could result in hearing loss or injury.
3. Failure to obtain a proper fit will reduce effectiveness of hearing
protectors and could result in hearing loss or injury.
4. Over protection can be dangerous. The wearer must be able to hear warning sig-
nals.
5. Wearers with hearing loss should exercise extreme caution.
6. It is the employer’s responsibility to ensure that the type of hearing protector and
its rating is appropriate for the user in their particular workplace.
7. Use caution when working around machinery or any other equipment to ensure
neck cord does not become caught or entangled.
8. Failure to follow these warnings could result in serious injury
or death.
9. Sparkplugs earplugs must only be used as part of a hearing
conservation program that complies with applicable local safety
and health regulations.
!
PACKAGING
6604 SparkPlugs
®
, Uncorded
200 Pairs per Box
10 Boxes per Case
6654 SparkPlugs
®
, Corded
100 Pairs per Box
20 Boxes per Case
6615 SparkPlugs
®
, Metal Detectable Corded
100 Pairs per Box
20 Boxes per Case
6644 SparkPlugs
®
PlugStation
®
250 Pairs per Dispenser
6 Dispensers per Case
6645 SparkPlugs
®
PlugStation
®
500 Pairs per Dispenser
4 Dispensers per Case
LIMITED WARRANTY IMPORTANT NOTICE TO PURCHASER
This limited warranty is made in lieu of the warranties of
merchantability, fitness for particular purposes and all other
warranties, express or implied. There are no other warranties which
extend beyond the description on the face hereof. The physical stan-
dards and specifications of Moldex will be met by products sold.
Exclusive Remedies: damages for the breach of this limited
warranty are limited to the replacement of such quantity of Moldex
products proved to be defectively manufactured. Except as provided
above, Moldex shall not be liable or responsible for any loss, damages,
or liability, direct, indirect, incidental, special or consequential, arising
out of a sale, use or misuse, or the inability to use products by the user.
DISTRIBUTED BY:
Frequency (Hz)
125 250 500 1000 2000 3150 4000 6300 8000
Mean Attenuation (dB)
42.3 43.7 46.6 40.9 38.6 44.7 46.9 49.3 48.3
5.0 6.0 5.8 4.2 2.8 3.2 3.3 4.2 3.6
Standard Deviation (dB)
ATTENUATION DATA
Tested According to ANSI Specs S3.19-1974 Michael & Assoc., State College, PA.
NRR
33
CSA
AL
MOLDEX-METRIC, INC.
10111 W. Jefferson Blvd., Culver City, CA 90232
Tel: [phone] or [phone] Fax: [phone]
Email: [e-mail] www.moldex.com
Moldex Technical Service Department: [phone] or
[phone] Ext. 512/550
CANADIAN CUSTOMER SERVICE
TEL: [phone], Ext. 517
FAX: [phone]
Moldex, Ideas that wear well, random color pattern, SparkPlugs and PlugStation
are registered trademarks. ®NASCAR is a trademark of The National Association
for Stock Car Auto Racing, Inc. U.S. Patents #D414,359, #D413,465, #5,954,229,
#6,241,120. Made in U.S.A.
9700-739 REV M 3/13
Ideas that wear well.
®
MOLDEX TECHNICAL ASSISTANCE
Moldex provides all of the technical assistance required to set up a
hearing protection program. For more information call
[phone] ext. 512/550 or E-mail: [e-mail]
or visit www.moldex.com.