MSDS

ManualsBrandsMold Armor ManualsPaint32 oz. Mold Blocker

1Page:

Mold Armor Mold Blocker

MATERIAL SAFETY DATA SHEET

Special

Health

Flammability

Instability

04/27/2009

Date Created:

Revision:

04/19/2010Printed:

1. Product and Company Identification

Product Code:

BSNX111.3

Product Name:

Mold Armor Mold Blocker

Manufacturer Information

Company Name:

W. M. Barr

2105 Channel Avenue

Memphis, TN 38113

Phone Number:

(901)775-0100

Emergency Contact:

3E 24 Hour Emergency Contact (800)451-8346

Information:

W.M. Barr Customer Service (800)398-3892

Web site address:

www.wmbarr.com

Preparer Name:

W.M. Barr EHS Dept (901)775-0100

Intended Use:

Preventing Mold

FG516, FG516T, FG516W, FG536, FG300

Synonyms

2. Hazards Identification

No data available.

Emergency Overview

This material is classified as hazardous under OSHA regulations.

OSHA Regulatory Status:

ACUTE EFFECTS:

Eyes: Direct contact may cause transient irritation of the eye.

Skin: No effect is expected, however, transient skin irritation may develop depending upon individual

sensitivities.

Inhalation: No effect expected. Do not inhale vapor mist.

Ingestion: Transient nausea may occur depending upon individual sensitivities.

CHRONIC EFFECTS:

None known.

Target Orgrans: No data.

Health Hazards (Acute and Chronic)

See Potential Health Effects.

Signs and Symptoms Of Exposure

None known.

Medical Conditions Generally Aggravated By Exposure

Licensed to W.M. Barr and Company

Multi-region format

Summary of content (7 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET Mold Armor Mold Blocker Flammability Page: 1 Instability 0 1 0 Printed: 04/19/2010 Revision: 04/27/2009 Health Date Created: 04/27/2009 Special 1. Product and Company Identification Product Code: Product Name: Manufacturer Information Company Name: Phone Number: Emergency Contact: Information: Web site address: Preparer Name: Intended Use: Synonyms BSNX111.3 Mold Armor Mold Blocker W. M.
PAGE 2
MATERIAL SAFETY DATA SHEET Mold Armor Mold Blocker Page: 2 Printed: 04/19/2010 Revision: 04/27/2009 3. Composition/Information on Ingredients Hazardous Components (Chemical Name) CAS # 1. No hazardous ingredients at 1.0% or greater. 2. Methanol {Methyl alcohol; Carbinol; Wood Concentration NA 67-56-1 No Data. 0.17 % alcohol} 4.
PAGE 3
MATERIAL SAFETY DATA SHEET Mold Armor Mold Blocker Page: 3 Printed: 04/19/2010 Revision: 04/27/2009 7. Handling and Storage Precautions To Be Taken in Handling Avoid contact with eyes, skin, and clothing. Do not reuse this container. Precautions To Be Taken in Storing Keep from freezing. Store in a tightly closed container. 8. Exposure Controls/Personal Protection Hazardous Components (Chemical Name) 1. No hazardous ingredients at 1.0% or greater. 2.
PAGE 4
MATERIAL SAFETY DATA SHEET Mold Armor Mold Blocker pH: Appearance and Odor Page: 4 Printed: 04/19/2010 Revision: 04/27/2009 6-8 No data available. 10. Stability and Reactivity Stability: Conditions To Avoid - Instability Unstable [ ] Stable [ X ] No data available. Incompatibility - Materials To Avoid Normally unreactive. Avoid strong bases at high temperatures, strong acids, strong oxidizng agents and materials reactive with hydroxyl compounds.
PAGE 5
MATERIAL SAFETY DATA SHEET Mold Armor Mold Blocker Page: 5 Printed: 04/19/2010 Revision: 04/27/2009 12. Ecological Information No information available for this product as a whole. Toxicity: No data available. Persistence and Degradability: No data available. Bioaccumulative Potential: No data available. Mobility in Soil: No data available. Other Adverse Effects: No data available. 13. Disposal Considerations Waste Disposal Method Dispose of in accordance with local, state, and federal laws.
PAGE 6
MATERIAL SAFETY DATA SHEET Mold Armor Mold Blocker Hazardous Components (Chemical Name) 2. CAS # Methanol {Methyl alcohol; Carbinol; Wood 67-56-1 Page: 6 Printed: 04/19/2010 Revision: 04/27/2009 EPA CAA EPA CWA NPDES EPA TSCA CA PROP 65 HAP, ODC () No Inventory No alcohol} Canadian Regulatory Lists: Canadian NPRI: Canadian National Pollutant Release Inventory Canadian IDL: Canadian Ingredient Disclosure List SARA (Superfund Amendments and Reauthorization Act of 1986) Lists: Sec.
PAGE 7
MATERIAL SAFETY DATA SHEET Mold Armor Mold Blocker Page: 7 Printed: 04/19/2010 Revision: 04/27/2009 D2A - Teratogenicity and embryotoxicity - very toxic - other D2B - Eye irritation - toxic - other WHMIS Ingredient Disclosure List: Methanol meets criteria for disclosure at 0.1%. 16. Other Information Company Policy or Disclaimer The information contained herein is presented in good faith and believed to be accurate as of the effective date shown above.