Specification V1.0

LW005-MP
13 www.mokosmart.com
➢ Instantaneous frequency: Convert to decimal, then then divide by 1000, the unit is HZ.
The 2
nd
part will be sent in Port 7:
➢ Timestamp: Standard UTC time.
➢ Time zone: It is a signed number, convert to decimal, then then divide by 2, and this is UTC
time zone;
➢ Instantaneous active power: Convert to decimal, then then divide by 10, the unit is W.
➢ Instantaneous power factor: Convert to decimal, the unit is %.
7.3 Energy Payload
Energy payload will be sent in Port 8.
➢ Timestamp: Standard UTC time.
➢ Time zone: It is a signed number, convert to decimal, then then divide by 2, and this is UTC
time zone;
➢ Total energy: Convert to decimal, then divide by 3200, the unit is KW·H.
➢ Last hour's energy data: Convert to decimal, then divide by 3200, the unit is KW·H. This is the
energy data of the last hour: for example, if the reported time is 14:23, the total ebergy data
of the hour from 13:00 to 14:00 will be reported.
7.4 Over-voltage Payload
Over-voltage payload will be sent in Port 9.
➢ Timestamp: Standard UTC time.
➢ Time zone: It is a signed number, convert to decimal, then then divide by 2, and this is UTC
time zone;
➢ Over-voltage state: 01 means over-voltage state.
➢ Currents instantaneous voltage: Convert to decimal, then divide by 10, the unit is V.
➢ Over-voltage threshold: Convert to decimal, then divide by 10, the unit is V.
7.5 Sag-voltage Payload
Byte 0~3
Byte 4
Byte 5~8
Byte 9
Timestamp
Time zone
Instantaneous active power
Power factor
Byte 0~3
Byte 4
Byte 5~8
Byte 9~10
Timestamp
Time zone
Total energy
Last hour's energy data
Byte 0~3
Byte 4
Byte 5
Byte 6~7
Byte 8~9
Timestamp
Time zone
Over-voltage state
Currents instantaneous
voltage
Over-voltage threshold