APP Configuration Guide V1.0

LW005-MP
6 www.mokosmart.com
2.3.1.2 Application Settings
Duty-Cycle: It is only used for EU868, CN779, EU433 and RU864. The
default is off.
DR for join: It is only used for CN470, CN779, EU433, EU868, KR920,
IN865, RU864. DR selection for Join Request of OTAA mode. The default is
DR0, it ranges from DR0 to DR5.
CH: Channel Setting, Generally, the default is fine.
Uplink Strategy:
Option1: ADR on, ADR mechanism following the standard protocol stack.
Option2: ADR off. The device will choose the DR to send the payload
within the set DR range, and will try to ensure that the time taken to send
the payload is the same every time.
Max retransmission times: Maximum number of retransmissions when
selecting a confirmation frame to transmit an uplink Payload. The default
is 3 times. The value ranges from 0 -7 times.
Note: If the data length of the current payload exceeds the transmission
capacity of the selected DR, it will automatically make the DR plus one.
Note: Please do not modify advanced settings unless necessary.
DevEUI/AppEUI/DevAddr/AppKey/NwkSKey: Network parameters in ABP
mode.
Region/Subnet: Device frequency band selection, AS923/ AU915 /CN470
/CN779 /EU433 /EU868 /KR920 /IN865 /US915 /RU864 can be set.
Device Type: LoRaWAN device mode; it can be set Class A or Class C, the
default is Class C.
Message Type: Uplink payload type, it can be set unconfirmed or
confirmed, the default is confirmed.
Advanced Setting: Some advanced parameter settings, if not necessary, it
is not recommended to modify.