APP Configuration Guide V1.0

LW005-MP
4 www.mokosmart.com
2.3 Configure LW005-MP Parameters
2.3.1 LORA Parameters
In this page, user can configure parameter for LoRa Part:
When you log into the device successfully, you will enter the main page.
There are four parts of the parameter configuration: LORA, GENERAL,
BLUETOOTH and DEVICE.
Note: If a password is not entered within one minute, the login box will
disappear, you should click “CONNECT” again.
Note: If there is no action within 3 minutes after login, the system will
automatically login out.
The distance between the phone and the device should be kept within 10m
without wall obstruction. Otherwise, the device will not be searched. After
searching for the device, click the “CONNECT” to connect the device that you
want to configure.
Then you should enter the password, the default login password is “Moko4321”.