User Manual Part 6

Administration Tab
SpectraGuard® Enterprise User Guide
321
Note: Check the firewall settings of the Syslog server and modify them, if needed, so that the System is able to send
the logs to the Syslog server.
Location Properties
The Location Properties option enables you to define high-level administrative settings for a selected location. These
settings take precedence over any conflicting policies.
Event Activation
AirTight recommends that you select the check box Activate Event Generation for location ‘<selected location>’ only
after the deployment is stable and fully configured. If you are modifying a deployment, deselect the check box to
avoid spurious activity during the transient phase.
Event Activation
Intrusion Prevention Activation
AirTight recommends that you select the check box Activate Intrusion Prevention for location ‘<selected location>’
only after the deployment is stable and fully configured. If you are modifying a deployment, deselect the checkbox to
avoid spurious activity during the transient phase.
Note: Intrusion Prevention Activation section is not visible if WIDS license is applied.
Authorized APs should be in the Authorized folder before activating intrusion prevention. Their network
connectivity icon may show the status as Wired, Unwired, or Indeterminate.