User Manual Part 6

Administration Tab
SpectraGuard® Enterprise User Guide
275
No Wi-Fi Network
 Networks Monitored by the System: Specifies the networks monitored by the system.
 No Wi-Fi Networks at this Location: Specifies the networks to which no Wi-Fi AP should be connected at the
selected location.
You can move a network from Networks Monitored by the System to No Wi-Fi Networks at this Location.
Click Add to enter a new network address to add a No Wi-Fi network at the selected location.
RSSI based Classification
APs are further classified based on the RSSI value that the sensors receive. If the signal strength exceeds a maximum
threshold, the sensor appropriately classifies the AP. Airtight higly recommends that you turn on network
connectivity based classification as it is the most reliable mechanism to classify wireless devices when most of your
network is monitored using sensors and NDs.
Under RSSI Threshold, select one or both (recommend) of the following checkboxes:
 Pre-classify APs with signal strength stronger than threshold as Rogue or Authorized APs to specify the
threshold RSSI value based on which the system further classifies APs.
 Pre-classify APs connected to monitored subnet as Rogue or Authorized APs to classify APs based on their
network connectivity.