User Manual Part 6

Administration Tab
SpectraGuard® Enterprise User Guide
315
Antenna Selection and Port Assignment
Under Antenna Selection and Port Assignment tab
1 For Port Assignment for SS-200 Sensor
 Select Diversity On or Diversity Off
 Diversity On: This is the default setting, which means both the antennas are dual band. Select this option if you
have a dual band (2.4 GHz and 5 GHz) antenna connected to both the ports on the sensor. Assigning this setting to a
sensor which does not have a dual band antenna connected to both ports, can result in unpredictable sensor behavior
leading to loss of system functionality. Make sure that the template with “Diversity On” setting is indeed applied to
sensor(s), which have dual band antenna connected to them.
 Diversity Off: Select this option if and only if your sensors have a 5 GHz antenna connected to Port 1 and a 2.4
GHz antenna connected to Port 2. The figure in the Antenna Port Assignment tab shows how to locate the ports to
ensure that the single band antennas are correctly connected. Assigning this setting to a sensor that does not have
single band antennas connected as mentioned above can result in unpredictable sensor behavior leading to loss of
system functionality. Make sure that the template with Diversity Off setting is indeed applied to sensor(s) that have
two different single band antennas supporting 2.4 GHz and 5 GHz frequency bands and connected as mentioned
above.