User Manual Part 6

Administration Tab
SpectraGuard® Enterprise User Guide
311
Offline Sensor Configuration-Offline Sensor Parameters
 Enable offline Sensor mode: Select this checkbox to enable the offline sensor mode. When the offline sensor mode
is enabled, the sensor continues to detect and classify devices, raise event alerts, and prevent ongoing threats. (Default:
Selected)
 Time to switch to offline mode after Sensor detects loss of connectivity: Specify the time after which, if the
sensor does not receive any communication from the Server and Enable offline Sensor mode is enabled, the sensor
switches to the offline mode.
(Minimum: 5 minutes; Maximum: 60 minutes; Default: 15 minutes)
 Under Offline Sensor Parameters tab, you can view the following:
 Number of APs to be stored: Number of APs that the sensor will continue to detect in Offline mode (Default:
128)
 Number of Clients to be stored: Number of Clients that the sensor will continue to detect in Offline mode
(Default: 256)
 Number of events to be stored: Number of events that the sensor will continue to raise in Offline mode (Default:
256)
 Number of prevention records to be stored: Number of prevention records that the sensor will continue to store
in Offline mode to prevent ongoing threats (Default: 256)