User Manual Part 6

Administration Tab
SpectraGuard® Enterprise User Guide
307
well. If you deselect a channel from Channels to Monitor, then this channel is also deselected from Channels to
Defend section.
For operating region US, if you select channel 184, 188, 192, or 196 under Channels to Monitor or Channels to
Defend, and click Save, the following message box appears.
Warning while turning on channel in US safety band
If you click Yes, the channel is selected. If you click No, the channel is not selected.
Note: Channels 184,188, 192, 196 fall under the public safety band in the US. They are turned off, by default,
under Channels to Monitor and Channels to Defend.
VLAN Settings
The VLAN Settings tab facilitates the management of VLANs to be monitored by a sensor device in sensor mode.
These settings are applicable to sensor devices in sensor mode of operation only; and not to sensor devices in ND or
AP mode of operation. In the earlier versions of the system, specifying the VLAN to be monitored, or deleting the
VLANs that were being monitored could be done using the sensor command line interface only. From this version,
the addition and deletion of VLANs to be monitored can be done from the user interface as well, using the VLAN
Settings tab.