User Manual Part 6

Administration Tab
SpectraGuard® Enterprise User Guide
303
Note: The system stores the default device configuration in a predefined template System Template. You cannot
delete the System Template nor edit its name; it is unique. When a device is added or discovered, it is automatically
assigned the configuration settings in this template. You are allowed to edit the configuration settings in the System
Template to effect default configuration of your choice.
Whenever you delete a user-defined device template, all the sensors associated with that template are assigned the
System Template. You can override the template applied to a sensor manually from the Devices Sensors tab. If you
modify the settings in a template, the new settings are applied to the sensors to which this template is applied.
On every tab in Device Template, you will find the Save, Restore Defaults and Cancel buttons.
You can navigate from one tab to another without saving the changes and save the changes made on all tabs by
clicking Save on any one tab.
Radio Settings
You can define radio settings for SS-300-AT-C-60 and SS-300-AT-C-50 if you want to configure them as access points.
The other devices function as WIPS sensors only.
Radio Settings-SS-300-AT-C-60