User Manual Part 6

Administration Tab
SpectraGuard® Enterprise User Guide
302
The IP address or hostname of the splash page host must be added to the walled garden settings for the redirection to
work. Any other hostname or IP address that needs to be exempted from redirection can also be added here.
Use Add and Delete to modify the list of exempted hostnames or IP addresses.
Device Template
You can create different templates to be applied to AirTight devices through this screen. A device template is a
combination of settings for radio, channels to monitor, VLANs to monitor, sensor configuration, antenna selection
and port assignment. This combination can be applied to an AirTight device such as a SS-300-AT-C-50, SS-30-AT-C-
60, SS-200-AT, SS-300-AT-C-10, SS-200-AT-01, or SS-300-AT.
The SS-300-AT-C-50 and SS-300-AT-C-60 sensor models can serve as a sensor/AP combo. This means that the SS-300-
AT-C-50 and SS-300-AT-C-60 sensor model can function as a WIPS sensor as well as an AP; all other sensor models
can function as WIPS sensors only.
Device Template
You can choose a template as a default template, for a location. This template will be applied to any new sensor tagged
to that location.
Note: Sensors prior to Version 5.2 do not support additional channels (802.11j & Turbo channels), Sensor
Password Configuration, Offline Sensor Configuration, and Antenna Port Assignment features. If you apply
templates containing these settings to older sensors, older sensors will ignore the additional settings.
Click Add New Device Template to add a new device template.
Under Create Device Template, specify the following:
 Name: Unique name of the device template (less than 40 characters)
 Description: Brief description of the device template (less than 500 characters)