User Manual Part 5

Administration Tab
SpectraGuard® Enterprise User Guide
270
Authorized WLAN Setup
Select one of the following to characterize a particular location:
 This is a No Wi-Fi location: If no Authorized Wi-Fi APs are installed at this location. If you configure a location as
a no Wi-Fi location, the Specify Authorized SSID section is grayed out.
 Wi-Fi is allowed at this location: To specify the details of the Authorized Wi-Fi APs in this location.
Specify Authorized SSIDs
Under this tab, specify the Authorized SSIDs at this location. For each SSID, you can specify the detailed
configuration. This per SSID configuration is called an SSID template.
Creating a Configuration Template for an Authorized 802.11 SSID
Add Authorized SSIDs allows you to create an SSID template in one of the following ways:
 Add Visible SSID: To create an SSID template from a list of visible SSIDs. The visible SSID list is built using the
data received from sensors.
 Add Custom SSID: To create a template using a user-defined SSID.
Click Add SSID template to create a new SSID template. The Template for an Authorized 802.11 SSID dialog
appears where you can select multiple items in some fields.