User Manual Part 5

Administration Tab
SpectraGuard® Enterprise User Guide
253
 SSL
 SSL OPSEC
 SSL Clear
 SSL Clear OPSEC
 FWN
 Auth OPSEC
 SSL CA
 SSL CA Comp
 SSL CA RC4
 SSL CA RC4 Comp
 Asymmetric SSL CA
 Asymmetric SSL CA Comp
 Asymmetric SSL CA RC4
 Asymmetric SSL CA RC4 Comp
 SSLA Clear
 Under SIC Settings, you need to specify the following settings for the Simple Instructional Computer (SIC) for
all the authentication types except ‘Clear’:
 Server SIC Name: Specifies the server name of the SIC
 Client SIC Name: Specifies the Client name of the SIC
 Under CA Settings, if you have selected an authentication type that has a CA in it, select Create new digital
certificate, then, you need to configure the following parameters for the Certifying Authority (CA).
 IP/Hostname: Specifies the IP address or the hostname of the CA
 Object Name: Specifies the object name of the CA
 Password: Specifies the one time password needed to acquire the certificate
 Under Symmetric Key Based Settings, if you have selected an authentication type that does not have a CA in it,
select Create New Secret Key, then, you need to create a new secret key.
SpectraGuard SAFE
The SpectraGuard SAFE screen enables you to setup and manage groups for wireless Clients running SAFE.
Group Management
Group Management allows the user to manage SAFE policy groups. SAFE groups can be created manually. The
system can also be configured to create SAFE groups automatically from the users’ domain and logged in group as
reported by SAFE.
Each group can have a SAFE policy attached to it. The SAFE policies are created using a SAFE Client. The policy
configuration is then imported in the system.
The system gives the administrators the option to categorize the SpectraGuard SAFE Clients into groups
automatically. Automatic movement of SpectraGuard SAFE Client is based on the SAFE user’s domain and group
name information. Manual assignment of SAFE Clients to a group overrides any automatic assignment.
You cannot edit the default group.