User Manual Part 5

Administration Tab
SpectraGuard® Enterprise User Guide
252
OPSEC
Operations Security (OPSEC) is an analytic process used to deny an adversary information – generally unclassified –
concerning our intentions and capabilities by identifying, controlling, and protecting indicators associated with our
planning processes or operations. OPSEC does not replace other security disciplines – it supplements them.
OPSEC
Integration with OPSEC enables the system to send events to the specified OPSEC server.
 OPSEC Integration Status: If OPSEC integration is enabled, the system sends events to the configured OPSEC
servers. Otherwise, OPSEC integration services are shut off.
 If you select OPSEC Integration Enabled, you can configure OPSEC server settings. The system disables
OPSEC by default.
 Current Status: Displays the Current Status of the OPSEC server: Running or Stopped. An Error status is
shown in one of the following cases:
 System server is stopped
 OPSEC configuration is either incomplete or incorrect or if the OPSEC server is stopped
 Internal error, in which case you need to contact Technical Support
 Under OPSEC Server Settings specify the OPSEC server details.
 Server Name: Specifies the name of the OPSEC server
 Server IP: Specifies the IP Address of the OPSEC server
 Authentication Port: Specifies the OPSEC server authentication port used for communication with the
system
 Specify the authentication type you can select one of the following types of authentication:
 Clear