User Manual Part 5

Administration Tab
SpectraGuard® Enterprise User Guide
239
Cisco WLSE
WLSE Integration Status: If WLSE integration is enabled, the system interacts with the configured WLSE server.
Else, WLSE integration services are shut off.
If you select WLSE Integration Enabled, you can configure the following WLSE Server Settings. The
system disables WLSE by default.
Current Status: Displays the Current Status of the WLSE server: Running or Stopped.
WLSE Server Settings: If a valid WLSE server is not specified, the system does not interface with the WLSE
Server.
WLSE Server IP Address/Hostname: Port: Specifies the IP address or the name and the port number of
the WLSE server
Username: Specifies the username for the WLSE server
Password: Specifies the password for the WLSE server
To test the WLSE server settings, click <Test WLSE Server Settings>. The settings used for this test are those that you
have specified. A dialog appears on completion of the test.
Note: The user created for the system should have XML API privileges on the WLSE server. You should
add the IP address of the server to the Access Control List of the WLSE server.
WLSE Operating Policies: Specifies policies to integrate the system with the WLSE server.
If you select Enable AP Classification integrated with WLSE, you can integrate the system’s AP Classification
and Intrusion Prevention policies with the WLSE sever such that:
WLSE-managed APs that are Potentially Authorized automatically move to the Authorized AP folder
All WLSE-managed APs automatically move to the Authorized AP folder