User Manual Part 5

Administration Tab
SpectraGuard® Enterprise User Guide
238
(Default: Disabled)
 Import Signal Strength Information?: Indicates if the signal strength of the managed devices is to be imported
into the system.
(Default: Enabled)
Note: Location Tracking results may vary depending on the Channel scan settings set on the WLC.
Click <Add> to add the details for a new WLC. Click <Test> to confirm the validity of IP Address/Hostname, SNMP
settings, and version compatibility of the newly added Lwapp Controller.
Editing a WLAN Controller
Double-click a row or click Edit to open an LWAPP Configuration dialog similar to the one shown above, to update
the WLC details. Click <Save> to save all settings.
Deleting a WLAN Controller
Select a row and click Delete to discard the details of an existing WLC. You can delete multiple WLC details using
click-and-drag or using the <Shift> + <Down Arrow> keys and then clicking Delete.
Note: From 6.2 release onwards, WLC will support the H-REAP mode along with the Local mode.
Integration with Cisco WLSE
Wireless LAN Solution Engine (WLSE) is a centralized, systems-level application that manages and controls an entire
Cisco AirTight WLAN infrastructure. WLSE eases Cisco’s WLAN deployments, enhances network security,
maximizes network availability, and reduces operating expenses.
Integration with Cisco WLSE allows the system to automatically classify WLSE managed APs and enables manual
switch port blocking to contain Rogue APs.