User Manual Part 4

Administration Tab
SpectraGuard® Enterprise User Guide
219
Server Details
 Server Details: This is a read-only section and displays the following information:
 Server ID: Unique identifier for the server appliance. If you have installed a single server appliance, then
retain the default server ID, that is, 1.
 Port: The User Datagram Protocol (UDP) port number used.
 Max Sensors: Maximum number of sensors that can connect to the server.
 Max Sensor/AP Combos: Maximum number of sensors that can be converted to Sensor/AP Combo
devices. This is derived from the license. If you do not have a license for Sensor/AP combo device, this field
will not be seen.
 IPv6 status: Indicates if IPv6 is enabled on the server.
 Server Status: Enables you to view the Current Status of the server – Running or Stopped. The administrator
can Change Status, that is, start or stop the server.
 RAID Status: Enables you to view the Current Status of the RAID Array – Normal, Rebuilding, Degraded, or
Failed.
Manage Logs
The system keeps log of user activities. Under Manage Logs, you can specify in the User Action Logs Deletion
Threshold field, the number of days for which logs history is to be maintained, before deleting it automatically.
(Minimum: 7 days; Maximum: 365 days; Default: 30 days)