User Manual Part 4

Administration Tab
SpectraGuard® Enterprise User Guide
209
The Live RF Views screen enables you to define the parameters that are used in live RF views. These parameters are
specific to each environment. Tuning the parameters enables you to see more accurate views.
Live RF Views
Default Live RF Views Parameters contains the following options:
 Intrusion Detection and Prevention Regions: Specify the dBm values for which the system shows the
intrusion detection and prevention regions in the sensor coverage views.
 Intrusion Detection Display Threshold (dBm): Detection Range is the area over which sensors can reliably
detect wireless activity. Intrusion Detection Display Threshold determines the threshold for this range.
(Default: -85 dBm).
 Intrusion Prevention Display Threshold (dBm): Prevention Range is the area over which sensors can
prevent unauthorized wireless activity. Intrusion Prevention Display Threshold determines the threshold
for this range. (Default: -75 dBm)
Both the Detection and Prevention ranges are affected by parameters in the RF Propagation section.
Note: The reliability of the prevention also depends on the Intrusion Prevention Level selected on
Administration  Local tab  Operating Policies  Intrusion Prevention  Intrusion Prevention Level tab.
RF Propagation
The RF Propagation screen enables you to define default AP, Client, and Sensor antenna gain values.