User Manual Part 4

Administration Tab
SpectraGuard® Enterprise User Guide
207
Auto Location Tagging
Auto Location Tagging Configuration contains the following options:
 Devices: Based on the initial location of the device, the APs and Clients are auto-tagged immediately upon
discovery. You can select how the system should compute the initial location tag of the APs or Clients. The
system never auto-tags an AP or Client, if it is tagged manually. To re-enable auto location-tagging for a
device, you must delete the device and let the system re-discover it. You must manually tag sensors. You
can do one of the following:
 Choose the location tag of the sensor that sees the highest RSSI value for that device.
 Choose the location tag of the selected number of sensors that see the highest RSSI values for that device.
(Minimum: 2; Maximum: 10; Default: 2)
You can also discard the sensors that see a lower RSSI after comparing the value with a sensor that reports a higher
RSSI.
(Minimum: 20 dB; Maximum: 40 dB; Default: 30 dB)
 Events: The system tags events based on the location of the devices that participate in the events. The system
initially identifies a primary device — AP, Client, or Sensor for each event. The system automatically tags the
location of events based on the tag for the primary device associated with the event.
Note: The system never retags an event. You can tag the location of an event manually on the Events screen by
right-clicking the event and from the resulting menu by selecting Change Location.
Location Tracking