User Manual Part 4

Administration Tab
SpectraGuard® Enterprise User Guide
198
The system can use an LDAP server for user authentication. The LDAP Configuration screen facilitates configuration
of the LDAP server access parameters.
LDAP Configuration
Check Enable LDAP to enable user authentication using an LDAP compliant directory.
LDAP Integration Details: Provide configuration parameters for the system to be able to access the LDAP compliant
directory. Following details can be provided using this screen.
Connection Details: Provide details for the system to be able to establish connection with the LDAP server.
Primary Server IP Address/Hostname: Specifies the primary server IP address/Hostname of the
LDAP server.
Primary Server Port: Specifies the primary server port number of the LDAP server.(Default: 389)
Backup Server IP Address/Hostname: Specifies the backup server IP address/Hostname of the
LDAP server.
Backup Server Port: Specifies the backup server port number of the LDAP server.
Enforce Use of SSL/TLS: When this option is checked, only the SSL/TLS connection to the LDAP
server is allowed. When it is not checked, either of the Open or SSL/TLS connection to the LDAP
server is allowed.
Verify LDAP Server’s Certificate: When this option is checked, the connection to the LDAP server
is not allowed unless the certificate check passes. Click Certificate Management to add trusted root
CA Certificate(s) for the LDAP server. When this option is not checked, the connection to the LDAP
server is allowed without checking the LDAP server certificate.
LDAP Configuration Details: Provide details for the system to be able to search records in the
LDAP server.