User Manual Part 2

Devices Tab
SpectraGuard® Enterprise User Guide
105
Network Details – APs
All APs associated with the network, and with the location including the sub locations under that location, are seen
in APs tab under Network Details.
Fields in Network Details are as follows:
Network Name: specifies the network name
Allowed SSIDs: : This is the list of SSIDs allowed (from SSID templates) on this network at or below the location of
this network.
Gateway MAC: specifies the gateway MAC address.
Network: specifies the IP address of the network.
Location: specifies the network location.
Monitoring sensor: specifies the sensor monitoring the network.
The fields in the APs tab are the same as seen in Devices->AP tab.
You can select the fields that you want to view by clicking the icon.
You can view the AP details dialog by double clicking any AP row.
Note: Uncategorized APs are seen as rows with white background.
The Sensors tab appears on the Network Details dialog. The following screen displays the Sensors tab.