User Manual Part 2
Devices Tab
SpectraGuard® Enterprise User Guide
93
Sensor Config Shell
Configuration Template: Shows the current configuration template assigned to the Sensor. Refer to the
Device Template section for more details. In order to change the Sensor Configuration Template, Click
to open the Select Sensor Template dialog. Select the appropriate Sensor template and click <OK> to
assign that Sensor template to the Sensor.
Select Sensor Template Dialog
Location: Shows you the name of the Sensor’s location. The Sensor Location name always displays in the
Location field in the header of the Sensor Properties Tab dialog.
Click to open the Location Tag dialog. Here, you can view the complete list of locations and choose a
location for the Sensor. To view the list of locations, you must first set up your list of locations on the
Locations screen as explained in the section, Working with Location Folders and Location Nodes.