User Manual Part 2

Devices Tab
SpectraGuard® Enterprise User Guide
92
Sensor Name Dialog
MAC Address: Specifies the unique 48-bit IEEE format address of the Sensor assigned to the network
adapter by the manufacturer.
Device Tag: Click to specify text that provides additional information about the Sensor in the Device
Tag dialog. Click Save to save the device tag.
Sensor Device Tag Dialog
Country of Operation: Specifies the country in which the Sensor operates.
Sensor Model: Specifies the model number of the Sensor.
Sensor IP Address: Specifies the Sensor’s IP address, that is, the IP Layer or Layer 3 address. Click the
hyperlink to open the SSH Access to Sensor dialog. This dialog displays the IP Address and Login Name of
the Sensor you can log in to. You can access the Sensor using an SSH Client, which you can freely download
from the Internet. The Sensor IP address also displays in the IP Address field in the header of the Sensor
Details dialog on all tabs.
Note: Multiple Sensor IP Addresses are displayed if IPv6 is enabled on the server CLI.
SSH Access to Sensor Dialog
On connecting to the Sensor using the IP Address and Login Name, the SSH Secure Shell window appears. This is
the Sensor Config shell.